Cleaning And Maintenance; Troubleshooting - DeLonghi DCM02 Serie Instrucciones Para El Uso

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

The lid must be fitted to the carafe in order to operate the
anti-drip valve.
6 Plug in and switch on.
7 Don't remove the carafe until brewing has finished. W hen
the carafe is empty, switch off and unplug the appliance.
The hot plate will keep your coffee hot, but the sooner you
drink it, the better it will taste.
If you have not used the appliance for a while, run one full
tank of water (without coffee) through to clean it out.
TIPS
The Water ~ Your coffee is around 98-99% water so it's impor-
tant to ensure you use fresh filtered water. We recom-
mend using filtered water as it will reduce limescale and
prolong the use of your coffee maker.
The Coffee ~ This machine will optimize the flavor of medium
ground coffee, to deliver full body, aroma and taste. Be
sure before you buy that the coffee is suitable for a filter
machine. Or if you grind your own beans set the grinder
to medium coarseness. If the particles are too small,
water will pass through the filter too slowly resulting in
'over-extraction'; your coffee will taste bitter. If particles
are too large, water will pass through too quickly resul-
ting in ' under-extraction'; your coffee will taste weak and
watery.
The Measurements ~ To brew a perfectly balanced cup we re-
commend to use 1 measuring spoon of ground coffee per
cup. Use the measuring spoon provided to do this accu-
rately. Coffee will taste better when fresh so we recom-
mend drinking within 30 minutes of brewing, any longer
and taste begins to deteriorate.
The Maintenance ~ Use paper filters or a permanent filter ei-
ther type is suitable to produce great coffee. We recom-
mend that you rinse your permanent filter with water
after every use as any residual detergent could taint your
Problem
The coffee takes longer to brew.
The coffee has an acidic taste.
In case of leaks

CLEANING AND MAINTENANCE

Before carrying out any cleaning operations, switch the
appliance off, unplug it from the power outlet, and let it cool
down.
Carafe and lid, filter holder and permanent filter
holder
body
To descale
If the water in your area is hard, lime scale deposits may build
up over time. These deposits may affect the correct operation
of the appliance. It is recommended to descale the appliance
after 60 uses.
1 Buy a suitable descaler. Follow the instructions provided
2 Descale the machine.
3 After descaling, run at least two full tanks of water
4 Wash the parts.
Probable cause
The coffee maker needs to be descaled.
Insufficient rinsing after descaling.
Do not exceed the maximum water level On the back of the unit there is a over-
The machine must stay in a flat position.
6
coffee. Dispose of the used grounds immediately after
use to prevent drip through of unwanted flavors trapped
in the used coffee grounds. Try to keep your coffee ma-
chine clean, especially the shower head as this will help
to prolong your machine and maintain perfect brewing.
Do not use solvents or abrasive detergents to clean the
appliance. A soft damp cloth is sufficient.
Never immerse the coffee maker in water: it is an electrical
appliance.
Don't wash parts in the dishwasher.
Wash, then dry.
Wipe with a damp cloth, then dry. Don't use abrasives -
they'll scratch the plastic and metal surfaces.
with the product.
(without coffee) through the coffee maker to clean it
out.

Troubleshooting

Solution
Descale the machine as described in the
section DESCALING.
Rinse the machine as described in the
section DESCALING.
flow hole protection: if coffee maker is
too much loaded, water starts to spill out
from this hole.
en
en
Tabla de contenido
loading

Tabla de contenido