Product Specs - brondell Halo PH10-B Manual Del Proprietário

CONDITION POSSIBLE CAUSE
Filters are due for replacement
Poor performance,
or not purifying at
optimum capacity.
Blockage at Air Inlet or Air Outlet
Plastic packaging on filters was not
removed
Clearance around Halo is not
adequate for air ventilation.
Missing filters or filters were inserted
in the wrong order
Recommended room size has been
exceeded

PRODUCT SPECS

Model
Rated power source
Power consumption
CADR
Maximum recommended
room size
Maximum airflow volume*
Dimensions
Weight
POSSIBLE SOLUTION
Replace with a new filter set
Contact the Brondell Service Center
at 888-542-3355
Remove the plastic packaging and
put the filters back in
Ensure that there is clearance of 20
inches on each side and 4 inches
behind the Halo
Ensure the filters are placed in the
correct order (see Page 7, Step 4
of this manual)
Suggested coverage area is a
medium-to-large room
Halo PH10-B
120 V ~ 60 Hz
90 W
156
242 sq. ft.
197.9 cu. ft./ min
13.8" x 8.6" x 24.5"
350 mm x 219 mm x 623 mm
16.8 lbs. / 7.6 kg
17