Pairing Additional Cameras - Lorex LW1740 Serie Guía Para Usuarios

11

Pairing Additional Cameras

Note
If you have purchased additional cameras, it is highly recommended to pair the cameras
to the receiver before permanent installation.
"Pairing" is an electronic handshake between wireless devices. Wireless devi-
ces and components need to be paired in order to communicate with each
other.
The camera(s) provided with the system have already been paired to the re-
ceiver. By default, the camera(s) included are automatically paired to chan-
nels 1 & 2 on the receiver. See the channel label on the camera to check
which channel it has been set to.
If you have purchased additional accessory cameras, you will need to pair
them to the receiver. When pairing cameras, you can select the channel you
would like the cameras to be assigned to. You can also use the steps below to
reassign your existing cameras to different channels.
Note
Accessory cameras (model# LW1741AC1) are available from
To pair an additional camera:
1. Connect the new camera to a power outlet. Place the camera and the re-
ceiver within 1ft of each other.
2. Press
#LX400030; r. 1.0/17112/17628; en-US
, then select the Camera Setting icon. Press
www.lorextechnology.com.
to confirm.
53