Cleaning And Maintenance; Cleaning The Housing And The Charging Cradle; Cleaning The Tip; Replacing The Filter - Silk’n REVIT PRESTIGE Instrucciones De Uso

7. Cleaning and maintenance

EN
NOTICE! RISK OF DAMAGE!
• Always turn off and unplug the device
before cleaning or replacing the spare parts.
• Never immerse the device or any parts in
water or other liquids. Make sure that no
water or other liquids penetrate the housing.
• Do not use any aggressive cleaners, brushes
with metal or nylon bristles, or sharp or
metallic cleaning utensils such as knives, hard
scrapers and the like.

7.1 Cleaning the housing and the charging cradle

1. Wipe the device
contacting the pin of the charging cradle or the hole on the
bottom of the device) with a damp cloth.
2. Wipe it completely dry with a dry cloth.

7.2 Cleaning the tip

1. Remove the tip (
gently clean its inner side with the brush
remove dead skin cells and debris.
2. Wipe the outside of the tips thoroughly with a damp cloth.
3. Let it dry completely.

7.3 Replacing the filter

The filter should be replaced regularly for optimal results. Always
make sure that the filter is in place to prevent particles such as
dead skin cells or debris from entering the motor.
1. Gently remove the tip (
filter
14
2. Replace with a new filter and put the tip back into place.

7.4 Replacing the O-ring

The O-ring should only be replaced if it is damaged or worn.
Always make sure that the O-ring is in place, otherwise the device
will not work properly.
14
and the charging cradle
1
/ /
8 9
8
.
/ ) from the device and
10 11
16
/ / /
9 10 11
(avoid
7
after each use to
) and discard the