Operation; Insert Chisel; Switch On - Zipper Maschinen ZI-ABH1500D Instrucciones De Servicio

12.2 Operation

12.2.1 Insert chisel

Clean the tool shank of deposits and grease it lightly one.
 The clamp bolt from the tool shaft pull and turn 90 ° clockwise
 Set the tool and rotate the clamp bolt back to 90 degrees and
let it snap back into the tool shank.
 Check by pulling the tool if the tool is firmly held in place.
 Tool shank should always be greased before insertion.
 When removing the tool. Follow the above procedure in reverse
order.

12.2.2 Switch on

 Press the Power push button to the start the engine and set the stroke to move.
 By pressing the locking button can be switched to continuous operation.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-ABH1500D / ZI-ABH1700D
OPERATION
23