JB Systems PARTY BEAMS Manual De Instrucciones página 12

ENGLISH
000-085
4 086-170
171-255
000-085
5 086-170
171-255
000-085
6 086-170
171-255
000-085
7 086-170
171-255
000-085
8 086-170
171-255
9 000-255
000-080
081-160
10
161-240
241-255
11 000-255
12 000-255
13 000-255
14 000-255
Extra functions in the menu
 Press the [MENU] button until the display shows [SYS].
 Press the [ENTER] button if you want to enter this part of the menu with extra options.
 Use the [UP/DOWN] buttons to browse the extra functions in this System menu
o
[LEdS] with this option you can decide if the display should be always on or if it can go out
after a while when no new information needs to be shown



o
[TEST] will start up an automatic test mode, so you can check if all the projectors are
working.
o
[rESt] can be used to reset all the settings of the bar to the original factory settings

JB SYSTEMS®
Dimmer RED
Dimmer GREEN
Dimmer BLUE
Dimmer RED
Dimmer GREEN
Dimmer BLUE
Dimmer RED
Dimmer GREEN
Dimmer BLUE
Dimmer RED
Dimmer GREEN
Dimmer BLUE
Dimmer RED
Dimmer GREEN
Dimmer BLUE
General Dimmer
Fade In Flash effect
Fade out Flash effect
Strobe
Sound Controlled Flash
White Flash Led Control
Strobe Speed LED 1
Strobe Speed LED 2
Strobe Speed LED 3
Strobe Speed LED 4
Press the [ENTER] button to enter the option settings
Use the [UP / DOWN] button to select the desired mode:

ON = function activated. When no new information needs to be shown on
the display, the display will turn off.

OFF = function deactivated. The LED display will be always lit.
Press the [ENTER] button to confirm your setting
Just press the [ENTER] button to reset the bar.
10/55
USER MANUAL
Projector 4
Projector 5
Projector 6
Projector 7
Projector 8
Slow to Fast
Slow to Fast
PARTY BEAMS