TFA Dostmann 35.1078.10.IT Manual De Instrucciones página 33

WEATHER FORECASTING ICON SENSITIVITY SETTING:
For locations with rapid changes of weather conditions, the weather icons
sensitivity can be set to a different level for faster display of weather conditions.
1. The current sensitivity value will start flashing.
2. Use the OUT/+ key to set the weather sensitivity level. There are 3 levels of
setting: 2, 3 and 4. The value corresponds to the change of air pressure in
hPa before the weather icon will switch to another state. Level 2 is the most
sensitive setting, level 4 is the slowest recording setting (default setting is
"3").
Confirm with the SET key and exit the Manual settings.
3.
TO EXIT THE MANUAL SETTING MODE
To exit the manual setting mode anytime during the manual setting, press the CH
key or wait for automatic timeout. The mode will return to normal time display.
INDOOR RELATIVE HUMIDITY AND INDOOR TEMPERATURE:
The indoor temperature and humidity data are automatically updated and
displayed on the second section of the LCD.
Indoor temperature
in °C or ºF
TOGGLING AND RESETTING THE INDOOR READINGS:
1. Press the IN key to toggle between the indoor current, MAX/MIN
temperature and humidity data. The time and dates of the recorded data
will also be displayed in the time and calendar sections (for temperature
data only).
Once to show the MAX indoor temperature and humidity data with the
recorded time and date.
Twice to show the MIN indoor temperature and humidity data with the
recorded time and date.
Three times to return to the current displayed values.
2. Once the MIN or MAX data is displayed, press and hold the SET key for 3
seconds to reset the respective MIN or MAX record to current temperature
and humidity data, and current time, date display.
Note: The MIN or MAX data needs to be reset individually.
Flashing
MAX icon
32
Indoor relative
humidity in RH%