Settings Menus; Using Settings Menus; Settings Details; Temp Unit - koban KMIR-01 Manual De Instrucciones

KMIR-01

6. Settings Menus

6.1. Using Settings Menus

• Press MENU button to open the Settings Menus, as show below.
• Press UP/DOWN button to select menu item or change the value of current focus item.
• Press RIGHT/MENU button to enter the submenu or set focus on the current sellected
item.
Press LEFT button to return to the previous menu.
• If want to exit settings menus, can press MODE/RANGE/HOLD/IR button or press LEFT
button in root menu.

6.2. Settings details

• Palette mode
Thermal imager has five kinds of palette, such as:
PPress RIGHT/MENU button to select one of the display color palettes.
26
EN EN

6.3. Temp Unit

Press RIGHT/MENU button to set focus on this option and the color of option value will
change to black . Infocus state, use the RIGHT/MENU button to toggle
K, use LEFT/RIGHT/MENU button to exit focus state and the color of option value will
change white .

6.4. Measure

Press RIGHT/MENU button to enter measure menu.
Two selections are available: Temp.Max and Temp.Min.
Press RIGHT/MENU button to set cur select item on or off.
• Hot point: This option enables thermal imager
automatically detect the highest temperature point.
• Cold point: This option enables thermal imager
automatically detect the lowest temperature point.

6.5. Emissivity

• Press RIGHT/MENU button to set focus on this option. In focus state, use UP /DOWN
button to increase or decrease emissivity's value, use LEFT/RIGHT/MENU button to exit
focus state. The available range is 0.01 to 0.99 in 0.01 steps.
KMIR-01
o o
C, F and
27