Chapter 11 Memory Function; Review Memory Values - Gima CONTEC08A Manual De Instrucciones

Note
• Wait at least 4-5 minutes between two measurements.
When repeating measurements, because the arm appears congestion, it may not get correct blood
pressure measurement. After the blood flow, take a measurement again.
• When some factors affect the measurement results in measurement process, error messages will
appear on the screen, you can obviate the malfunction and restart a measurement.
3. In no physiological alarm state, press any button to carry on the corresponding button function;
in audio alarm state, press any button (except ON/OFF button) to clear up the audio alarm.
4. Take off the cuff, press ON/OFF button to turn the device off.
Chapter 11
Memory Function
The sphygmomanometer is designed to store the blood pressure, pulse rate values and the date and time
when measured, which are up to 100 groups. If there have been stored 100 groups, the earliest results
will be deleted when saving the 101 group of measurement results.

11.1 Review Memory Values

1. In the main interface (interface when boot-strap), press MEMORY button
to review the most recent measurement values in large-print with the
serial number from 1 to 100.
ENGLISH 66