Marmitek TV ANYWHERE Modo De Empleo página 18

☺
You can only access the screen below / change the handset code AFTER you programmed
the TV Anywhere (chapter 6).
The default setting of the remote is "0636". To change the code of both the 6in1 remote
and your TV Anywhere system:
1. Press and hold SETUP until the LED stays lit.
2. Press CBL.
3. Enter one of the following codes:
0639
0638
0637
0636 (default)
4. Switch the TV Anywhere transmitter off and then on again (by using the ON/OFF switch [7])
5. Press the SOURCE and CHAN UP buttons (right button) at the front of the transmitter at
the same time.
6. The following text will appear on your screen:
HANDSET CODE 0636
PRESS [SET] TO CHANGE
OR
ANY OTHER KEY TO CONTINUE
7. Press "SET". The following text will appear on your screen:
PRESS [SET] AGAIN TO
CONFIRM
8. Press "SET" again.
9. The following text will appear on your screen (where WXYZ is the new code):
1 8
© MARMITEK