NESTOR MARTIN TQH13 Manual De Instrucciones página 99

CONNECTING AN EXTERIOR AIR-INTAKE
Your appliance is pre-equipped to have a vertical exterior air duct through the ground. If you have purchased an
optional base, you can also connect the duct through that.
Horizontal connection through the stand
This type of connection is only available with the purchase
of an optional stand
• Screw the stopgap until the stand's air intake is blocked
( same procedure with the bench stand).
stop gap
• Pass a pipe of 100mm diameter through the wall.
• Connect the pipe to the fl ue outlet tube at the black of
the stand.
Vertical connection through the ground
Warning: for this kind of connection, install a ground
protection plate.
• Create a hole of a 100mm diameter in the fl oor.
• Connect the fl exible aluminium air duct.
99