NESTOR MARTIN TQH13 Manual De Instrucciones página 98

SETTING UP ON THE BENCH STAND
Procedure
•
Place the bench stand in the prepared position.
•
Place the stove on the bench stand using a lift or sharing the weight between several people.
•
Unscrew the 2 fi xing screws of the control panel (Torx screws) and remove it. (See previous page).
•
Pass the bolt through the flue of the outside air intake system of the bench stand and put it into the mounting
hole using an Allen key (see diagram above)
•
Using the latch key, bring the nut in front of the hole and screw it in with the Allen key.
Warning: the tighter the screw is, the more resistance there will be in moving the stove.
Diagram of the screw hole.
98