NESTOR MARTIN TQH13 Manual De Instrucciones página 92

INTERCHANGING THE TOP/BACK FLUE OUTLETS
By default your appliance is equipped for a top connection, but you also have the possibility of connecting it
through the back.
Procedure:
Through the top
top fl ue outlet
Diaphragm
•
Remove the fl ue outlet with its diaphragm
•
Take out the pre-cut disk in the back of the appliance using wire cutters or a hacksaw.
•
Remove the metal back of the appliance.
•
Unscrew the back cast-iron cap that blocks the rear air inlet.
•
Attach the rear fl ue outlet with its joint to the back.
•
Replace the metal back sheet
•
Attach the cast-iron stopgap with its joint to the upper exit of the appliance (from above or from inside by lifting
the vermiculite).
•
Place the cast-iron stopgap in the hole of the casing.
Pre-cutdisk
92
Through the back
Stop gap
gasket
metal stop gap
gasket
Rear fl ue outlet
metal back