Starting The Engine - Smarter tools AP2000I Manual Del Usuario

Tabla de contenido

3.4 Starting the Engine

OPERATE THE ENGINE IN A WELL VENTILATED AREA.
DO NOT connect any electrical devices to the outlets on the generator
before starting the engine.
1. Turn the Smart Throttle switch "OFF"
You may turn the Smart Throttle switch to
"ON" once the engine is started and a steady
idle is achieved. (below 0°(32°F)/5mins,
below 5°C(41°F)/3mins.)
3. Turn the Fuel Petcock knob to the
"ON" position.
3-4
2. While holding the fuel
tank cap so that it will not
move, turn the air vent
knob to "ON".
Tabla de contenido
loading

Tabla de contenido