Troubleshooting - Cuda surgical ELITE 300 Manual De Uso

11. TROUBLESHOOTING

Problem
The power indicator (refer
to 4.1) is not lit.
The power indicator is lit,
but Xenon lamp will not
ignite.
LIT037 CUDA ® SURGICAL ELITE 300
(English)
Solution
A. Check that the AC power cord is properly
connected.
B. Check the fuses. If necessary, replace.
A. Check to make sure lamp cartridge is seated properly.
B. Check that the lamp door is secured.
C. Check hour meter; if lamp hours exceed the rated lamp
life, replace the lamp (refer to 9.1).
Rev. L
Page 12 of 60