How To Access The Ip Camera Via Web Interface - Urmet 1093/184M11 Guía Rápida

3.3

HOW TO ACCESS THE IP CAMERA VIA WEB INTERFACE

Double-click on a camera in the IP Discovery tool list to open the direct connection of the camera to the Internet Explorer
browser web page automatically.
Enter username (default: admin) and password (default: admin) and install ActiveX Urmet SpA of the camera on the PC (this
step is only required for connecting the first PC-camera connection).
If you cannot install ActiveX Urmet SpA on your PC:
4) Add the IP address of the camera to the trusted sites list in the following Internet Explorer menu:
Tools -> Internet Options -> Security or Protection (according to the versions of Internet Explorer).
In the same window, uncheck "Require server verification (https:) for all sites in the zone".
5) Manually lower the security level for all trusted sites to Low
6) Save the changes and repeat the ActiveX Urmet SpA installation procedure.
It is advisable to proceed as follows to use Internet Explorer 11 on Windows 7 or higher:
5) In Internet Explorer select Tools -> Compatibility View Settings.
6) Add the camera IP address to the compatibility list in the window that opens.
7) Enable all the compatibility options in the same window. In particular, select Display all websites in Compatibility View.
8) Save the changes and repeat the ActiveX Urmet SpA installation procedure.
IMPORTANT NOTE
Refer to the complete manual on the CD provided with the product for details on how to use the camera web interface.
DS1093-106A
.
24
Made in Taiwan