Connections; Power Connection; Image Adjustment - Panasonic WV-CF102E Instrucciones De Operación

■ Connections

● Video output connection
Important:
When connecting the coaxial cable to
the video output connector, make sure
that the connector of the coaxial cable is
locked firmly.
Connect the video output connector to the
monitor, or other system devices, with the
procured coaxial cable.
The maximum extensible cable length is
shown in the table.
Cable type
RG-59/U (3C-2V)0
RG-6/U (5C-2V)00
RG-11/U (7C-2V)0
RG-15/U (10C-2V)
● Power connection
Connect the two-conductor cable of the
camera to the power supply. The wire colors
are shown in the table.
Wire color
White
Black

■ Image Adjustment

1. Connect an adjusting monitor to the
video output connector.
2. Pan, tilt and azimuth adjustment
Important:
Do not hold the camera by the lens unit
when adjusting
azimuth.
Extensible length
Approx. 250 m
{825 ft}
Approx. 500 m
{1 650 ft}
Approx. 600 m
{1 980 ft}
Approx. 800 m
{2 640 ft}
12 V DC
Positive
Negative
panning, tilting, or
● Cable Length and Wire Gauge
Use the formula below to calculate the
power cable and power supply. The voltage
supplied to the power terminals of the cam-
era should be within 10.8 V DC and 16 V
DC.
Resistance of copper wire [at 20 °C {68 °F}]
Copper wire #24
2
size (AWG) (0.22 mm ) (0.33 mm
Resistance
0.078
Ω/m
Resistance
0.024
Ω/ft
10.8 V DC ≤ V - 2 (R x I x L) ≤ 16 V DC
A
L: Cable length (m)
R: Resistance of copper wire (Ω/m)
V : DC output voltage of power supply
A
unit
I: DC current consumption (A)
See specifications.
q Rotate the panning table to adjust the
panning position of the camera (Range:
320°).
• The adjusting range is from +180 °
(clockwise) to –140 ° (counterclockwise).
• Tighten the panning table lock screw
after adjusting.
#22 #20 #18
2 2
) (0.52 mm ) (0.83 mm
0.050 0.03 0.018
0.015 0.009 0.005
2
)
13