Tabla de contenido
J6.Anti Car-jack Code 1 (Through/Cut)
Code 1 de Anti Car-Jack (transfert/
coupure)
Código 1 de Anti-Ladrón de Coches
(Directo/Corte)
J8.Anti Car-jack Code 2 (Through/Cut)
Code 2 de Anti Car-Jack (transfert/
coupure)
Código 2 de Anti-Ladrón de Coches
(Directo/Corte)
J7.SEC-8343 EXT Extender (Off [Through]/
On [Cut])
Extenseur EXT SEC-8343 (Désactivé
[Transfert]/Activé [Coupure])
Extensor EXT SEC-8343 (Desactivado
[Directo]/Activado [Corte])
J9.Ai-NET Head Unit Type (CVA-1000
[Through]/CDA-7949 [Cut])
Appareil de tête Ai-Net (CVA-1000
[Transfert]/CDA-7949 [Coupure])
Unidad principal tipo Ai-NET (CVA-
1000 [Directo]/CDA-7949 [Corte])
J10. Alarm Output Select (Constant
[Through]/Pulsed [Cut])
Sélection de sortie d'alarme
(Constante [Transfert]/Pulsée
[Coupure])
Selección de salida de alarma
(Constante [Directa]/Pulsada [Corte])
J11. EXT-1 Impact Disable (Off [Through]/
On [Cut])
Désactivation d'impact de EXT-1
(Désactivé [Transfert]/Activé
[Coupure])
Inhabilitador de impacto de EXT-1
(Desactivado [Directo]/Activado
[Corte])
206
English/Français/Español
Dealer Programm-
able Features
J6 and J8 defines one of four procedures for
deactivating Anti Car-Jack mode. See page
106 for further information about this
procedure.
Method 1: J6 THROUGH, J8 THROUGH
Method 2: J6 CUT, J8 THROUGH
Method 3: J6 THROUGH, J8 CUT
Method 4: J6 CUT, J8 CUT
See J6. (Anti Car-Jack deactivation)
Off:
SEC-8343 not connected.
On:
SEC-8343 EXT Extender
connected. This module adds 8
additional EXT outputs to the
security system.
CVA-1000:The CVA-1000 System Control
Monitor/Receiver is connected to
the SEA-8081.
CDA-7949:The CDA-7949 Tuner/CD Player
is connected to the SEA-8081.
Constant: The alarming output will stay on
constantly when the system is
tripped or panicked for the
duration of the alarm cycle.
Pulsed:
The alarming output will pulse on
and off when the system is tripped
or panicked for the duration of the
alarm cycle.
Off:
The impact and ignition sensors
will not be disabled for 20 minutes
when the EXT-1 output is
activated.
On:
The impact and ignition sensors
will be disabled for 20 minutes
when the EXT-1 output is
activated. This feature is designed
to allow the connection of a
remote engine starter to the
system.
English
Tabla de contenido
