Use While Traveling; Troubleshooting Information - CMF SpinaLogic Manual De Instrucciones

Use While Traveling

You should try to use SpinaLogic at the same time every day .
The clock inside the device counts each day starting at midnight Pacific
Standard Time (PST), 7:00 AM Greenwich Mean Time (GMT), and will only
allow one treatment every 24 hours . If you travel outside of your normal
time zone, you should try to treat at the same time you normally would
at home . Do not take the SpinaLogic device through airport x-ray
machines because the x-rays may damage the device .

Troubleshooting Information

If you hear beeps before your 30-minute treatment is complete, there
may be a problem with your device . Look at the LCD screen for a picture .
Table 1 below shows pictures that may appear on the LCD screen and
other common problems (left side of table) . The action to take for each
picture or problem is on the right side of the table .
TABLE 1. DISPLAY MESSAGES
DISPLAY PICTURE
Magnetic Interference – announced by
three beeps . The "X" will flash .
1 . If the device looks damaged, call
2 . If not, try moving to another location in
3 . If the picture is still displayed, replace
4 . If the device still shows the picture, call
Replace Battery – announced by three
beeps . Replace the batteries with new ones .
Phone For Help – announced by three
beeps . Call Customer Care .
(Troubleshooting continues on page 12)
ACTION TO BE TAKEN
Customer Care .
your house . Make sure you are not near
metal objects .
the batteries with new ones .
Customer Care .
EN
11