Disassembly; Maintenance And Servicing; Maintenance And Cleaning - Bosch Deepfield Connect Manual Original

14 |
 Close the battery compartment cover and lock it carefully
with the two screws.
 Secure the transmitter to the transmitter bracket again.
 Hold the magnet against the recess on the transmitter
(see figure 1, page 2).

Disassembly

Disconnecting the sensor rod from the trans-
mitter
 Undo the union nut from the transmitter socket by turning
it anti-clockwise and remove the plug connection.
 Screw the socket protection cap onto the socket to pro-
tect it against dirt.
Retrieving the sensor rod from the soil
 Remove as much soil as necessary to be able to grip the
sensor rod and pull it out of the soil.
NOTE
 Risk of damage!
The use of tools or pulling on the cables may destroy
the sensor rod. Do not use tools and do not pull on the
cables in order to remove the sensor rod from the soil.
Detaching the transmitter from the transmitter
bracket
 Take the Sicherungs cap off and remove the cable tie.
 Pull the transmitter bracket out of the ground.

Maintenance and servicing

Maintenance and cleaning

The monitoring station does not require maintenance.
Remove any dirt from the monitoring station using a suitable
brush.
NOTE
 Risk of damage!
Penetrating water or chemicals may damage or de-
stroy the monitoring station. Do not use chemicals or
pressure washers. Clean the monitoring station using dry
means only.
Asparagus Monitoring | (15.1.19)
Customer services
Deepfield Connect customer services will be pleased to help
you with any product-related questions.
Germany
Bosch Software Innovations GmbH, Deepfield Connect
Grönerstraße 9
71636 Ludwigsburg
Telephone: +49 30 726112112
E-mail: [email protected]
www.deepfield-connect.com
Answers to frequently asked questions (FAQ) can be found at
https://www.deepfield-connect.com in the "Support" tab or
in the mobile app at "Help and Feedback" in the main menu.
Decommissioning and storage
For the purpose of decommissioning, disassemble the moni-
toring station; see "Disassembly", page 14.
Store the monitoring station in the storage conditions set out
in the technical data, see "Technical data", page 12.
Returning the device
The monitoring station is the property of Bosch
Software Innovations GmbH.
The monitoring station cannot remain in your
possession after the end of the contract. You
must not dispose of the monitoring station.
This also applies to defective monitoring sta-
tions. You will receive further information from
Deepfield Connect about how to return the de-
vice at the end of the contract.
According to the European Guideline 2012/19/EU for Waste
Electrical and Electronic Equipment, electric devices that are
no longer usable, and according to the European Guideline
2006/66/EC, defective or used battery packs/batteries,
must be collected separately and disposed of in an environ-
mentally correct manner.
WEEE no.: DE82229983
We reserve the right to make changes to the design of the de-
vice in the interests of further development.
Bosch Software Innovations GmbH, Deepfield Connect