Steam Cycle Guide; Smart Features; Getting Connected; Smart Grid - KENMORE ELITE 796.8178 Manual De Uso Y Cuidado

HOW TO USE

STEAM CYCLE GUIDE

Cycle Steam
Steam Sanitize
Steam Refresh
+
Auto Dry Cycle
Static Shield
+
+
Steam Option
Accela Steam
+
Static Shield
* Shirt: 70% cotton / 30% poly blend. Except especially delicate fabrics.
• When the lint filter or exhaust duct is clogged, steam options will not give proper results.
• For best results, load articles of similar size and fabric type. Do not overload.
NOTE:
• When an Auto Dry cycle is selected with the STATIC SHIELD or ACCELA STEAM option, a dry level of Less or Damp
cannot be selected.
• The STATIC SHIELD option may also be selected during Timed Dry cycles.
• After the steam option is selected in Timed Dry, the MORE TIME or LESS TIME buttons will change the steam time only.
• After pressing Start/Pause, the MORE TIME or LESS TIME buttons will be disabled.

SMART FEATURES

GETTING CONNECTED

You need the following devices and applications to use
the Smart Grid and other smart features on your dryer.
Required Devices: A wireless router, Kenmore Elite
Smart Dryer, and a mobile device.
Required Application: Kenmore Smart App.
IMPORTANT: You must download the Kenmore Smart
app to your mobile device, connect your Kenmore Smart
appliance to the internet, and register the appliance to
your account in order to use the Smart Grid function.
Connecting the Dryer to the Internet
Refer to the Quick Start Guide that came with your smart
appliance for detailed instructions on creating a Kenmore
account and setting up the appliance for connected
operation from your smart phone. For additional
assistance, visit http://www.kenmore.com/smart

SMART GRID

Lower your energy costs to wash and dry your clothes by
avoiding peak usage periods, with information supplied by
your local electric utility company.
This feature responds to notification events from your utility
company to run high energy-consuming tasks during off -peak
periods when demand is lower. These notification events are
known as Demand Response signals.
NOTE: When Smart Grid is enabled, you may experience
delays or extended cycle times during peak usage periods. To
do laundry during peak usage periods without any delays, refer
to the information below to cancel the Smart Grid function.
Using Smart Grid:
Smart Grid is initially enabled. Press the SMART GRID
1
button once to disable the function. Once Smart Grid
is set, the settings will be maintained even when the
appliance is turned off .
Temp. Control Dry Level
Press the SMART GRID button before the cycle starts,
2
Press the SMART GRID button during the cycle, to
3
REMOTE START
Use a smart phone to control your appliance remotely.
NOTE: For better performance and to protect your
clothes, this function can only be used with certain
cycles and options. You must first close the door and
connect to a gateway to use this function. The assurelink
LED should be illuminated.
.
To use Remote Start:
Select a cycle and options.
1
Press the REMOTE START button. The Remote Start
2
Start the dryer from the application on your smart
3
30
Fabric
Fabric Type
State
comforter, bedding
dry
children's clothing
comforter
dry
shirts*
varies by
wet
selected cycle
varies by
wet
selected cycle
varies by
wet
selected cycle
to cancel the function completely. The Smart Grid LED
(blue) will turn off .
cancel the function for that cycle only. The Grid
Mode LED (red) will turn off and Smart Grid will be
canceled for the cycle in process. Smart Grid will
resume for the next cycle.
LED will turn on.
phone. (For more information, see the booklet
shipped with your dryer.) If you do not start the dryer
remotely, the dryer will wait to start the cycle until
the START button is pressed.
Maximum
Amount
single (1 each)
3 lb
single (1 each)
5 each
8 lb (18 items)
8 lb (18 items)
8 lb (18 items)