General Information; Getting Ready - CoCo TPC-300 Guía De Instalación Rápida

TPC-300 WIRELESS HOME CONTROL STATION

General information

The TPC-300 is a computer controlled transmitter
with built-in timer with the following capabilities:
• A programmable timer for automatically
activating or deactivating COCO receivers.
• The timer can be synchronized with sunset and
sunrise time settings for numerous cities in
various countries.
• Automatic transition from standard time to
daylight saving time.
• COCO receivers can also be controlled manually,
as long as the TPC-300 is programmed and
connected to a PC with software.
EN

Getting ready

1. Insert the USB stick into a USB port of your
computer. Run the installer, 'Setup.exe' , that is
stored on the USB stick. Follow the instructions to
finish installation.
2. Open the battery compartment of the TPC-300
and place two AA batteries in the holder. Please
keep in mind the correct polarity.
3. Connect the TPC-300 to the USB-connection
of a computer. If you are running Windows XP
or higher, the TPC-300 will automatically be
recognized and after a few seconds the notification
"New hardware is ready to use" will appear.
6
®