Replacement Parts; Power Probe Warranty - POWER PRO BETEK Power Probe 3EZ Manual De Instrucciones

REPLACEMENT PARTS

The Power Probe 3EZ is engineered for years of reliable
service. Some components can wear out over time with heavy
use. Replacement parts can be obtained from your tool dealer
or by contacting Power Probe Tek's Technical Support depart-
ment at 1-800-655-3585 or email to [email protected]
Replacement Probe Tips (# PPTK0024)
The Rocker Switch (# PPTK0021) can be easily replaced in the
field as the switch contacts can wear over time. Remove the
Rocker Switch by using a flat pry tool such as a screwdriver
and carefully pry the switch up from the probe face. Place the
new Rocker Switch straight into the switch opening and press
down firmly until the new switch is flush with the probe face.
Replacement Battery Clip Set (# PPTK0025)

POWER PROBE WARRANTY

Power Probe products undergo a strict quality control inspec-
tion for workmanship, function, and safety before leaving the
factory. From the date of purchase, we will warranty/ repair
Power Probe products for one (1) year against defects in parts
and workmanship. All repairs due to misuse will be charged a
fee not to exceed the cost of the tool. All warranty units must
be accompanied by a copy of the original sale receipt. In the
event of a malfunction or a defective unit, please call or write
Power Probe Technical Support or your Power Probe dealer.
27
WWW.POWERPROBETEK.COM