Operating The Lamp Tester - Amprobe LT-10 Manual De Uso

• Tests fluorescent (electroluminescent) lights
• Built-in VolTect™ non-contact voltage detection
• Lamp and filament test to check fluorescent light bulbs
• Simple one-handed, single button operation
• Ultra-compact design for portability
• 4 foot removable, fully retractable antenna included to test lights and
voltage without a ladder
• Compatible with all fluorescent (electroluminescent) light bulbs:
- T2, T4, T5, T8, T9, T10, T12
- Fluorescent energy saving light bulbs
• Insulated antenna sleeve and tip provided to safely extend and retract
during use
• Does not work with LED and incandescent (standard) light bulbs
• Replacement parts: Antenna LT-10-ANT (Item No. 4357839)
OPERATING THE TESTER
The test probe / antenna emits a high frequency voltage (approx. 3 kV) to
ionize the light fixtures in order to diagnose the failure.
W Precautions:
• When LAMP TEST button is pressed, be alert. Do not touch test probe
or antenna. Discharge can cause electric shock or personal injury.
• Do not attempt to overreach. Make sure you have proper footing and
balance at all times.
• Do not allow test probe or antenna to touch energized wires.
• To avoid damages to antenna and personal injury, do not attempt to
bend or use the antenna as a crowbar.
• Do not operate the instrument with the case or the battery door open.
• Do not use if the instrument appears damaged or doesn't operate
properly. If in doubt, have the instrument serviced.
• The non-contact voltage function is always on. Test on a known live
source within the rated ac voltage range of the product, both before
and after use to ensure the instrument is in good working condition.
5