SIOUX A Serie Manual De Instrucciones Y Lista De Piezas

Ocultar thumbs Ver también para A Serie:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 7

Enlaces rápidos

INSTRUCTIONS & PARTS LIST FOR SPS10P18 PISTOL SANDER
Read and understand these instructions before operating this tool.
Everyone using, maintaining, changing accessories or working near this tool must read, understand and follow
Sanders can cause flying particles.
Proper eye protection must be worn at all times by tool user and bystanders.
Flying particles can cause eye injury.
This sander is not guarded for use with a grinding wheel.
Do not operate this sander with a grinding wheel.
Operating this sander with a grinding wheel can cause injury.
Sanding discs larger than 5" (127 mm) can fly apart if used on this sander.
Do not use sanding discs larger than 5" (127 mm) with this sander.
Sanding discs that fly apart can cause injury.
Only one sanding disc installed on this tool at a time can be properly tightened.
Do not install more than one sanding disc at one time.
Sanding discs that are not properly tightened can come off and cause injury.
Backing pads that are worn, damaged, nicked, bent, warped or burred can cause the sanding disk to tear and burst.
Do not use backing pads that are damaged, nicked, bent, warped or burred.
Sanding pads that burst can cause injury.
Power tools generate noise.
Ear protection must be worn when tool noise level exceeds 85 dBA. We also recommend that ear protection be
worn when the tool noise level is below 85 dBA. See the tool's information sheet for the noise level.
Prolonged exposure to noise can cause hearing loss.
Power tools vibrate.
Excessive vibration can cause injury. If numbness, tingling, pain or whitening of the skin occurs, stop using tool
and consult a physician. See the tool's information sheet for the vibration level.
Prolonged exposure to vibration can cause injury.
Sanding pads and disks can cause cuts and abrasions.
Wear protective clothing and gloves to protect hands. Keep hands and other body parts away from sanding pads
and disks to prevent cutting or pinching.
Contact with sanding disks and pads can cause injury.
Sanders present a risk of entanglement.
Keep loose hair away from power tools and accessories. Keep hands away from moving parts of the tool and
accessories. Do not wear jewelry, loose clothing, or neckwear around power tools. Keep work area clear of cleaning
rags and all items that could become entangled with the tool.
Entanglements can cause injuries.
Sander operations creates dust.
Do not breathe sanding dust. Use approved mask.
Breathing grinding dust can cause injury.
This tool is not insulated for contact with electric power sources.
Do not use near live electric circuits.
Electric shock can cause injury.
250 Snap-on Drive • PO Box 1596 • Murphy, NC 28906 • USA • Phone: 828-835-9765 •www.siouxtools.com
SERIAL"A"
SAVE THESE INSTRUCTIONS!
WARNING
When used improperly power tools can create hazardous situations.
these Safety Instructions!
Improperly used power tools can cause injury or death.
SANDER SAFETY
1
Form ZCE780
Date 2007August14/A
Page 1 of 24
Printed In U.S.A.
Tabla de contenido
loading

Resumen de contenidos para SIOUX A Serie

  • Página 7 INSTRUCCIONES Y LISTA DE PIEZAS PARA SPS10P18 PISTOLA LA LIJADORA SERIE“A” Lea y entienda estas instrucciones antes de usar esta herramienta. ¡NO PIERDA ESTAS INSTRUCCIONES! ADVERTENCIA Una herramienta motorizada puede ser peligrosa si no se usa correctamente. ¡Las personas que vayan a usar la herramienta, darle mantenimiento, quitar o poner accesorios o trabajar cerca de la herramienta deben leer, entender y respetar estas instrucciones de seguridad! Una herramienta motorizada que no se use correctamente puede provocar lesiones o fatalidades.
  • Página 8 Siempre mantenga la herramienta lubricada correctamente y en buen estado. Utilice solamente aceite para motores neumáticos de Sioux No. 288. Ver la hoja de información de la herramienta para saber tener información sobre otros aceites o grasas que puede utilizar. No deje caer el extremo de la manguera en el suelo donde puede ensuciarse y transportar la suciedad a la herramienta.
  • Página 9: Uso Recomendado

    *según PN8NTC1 *según ISO 8662 DECLARACION DE CONFORMIDAD Nosotros, Sioux Tools, Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declaramos bajo nuestra única responsabilidad que los productos SPS10P18 con los cuales se relaciona esta declaración están en conformidad con las siguiente(s) norma(s) u otro(s) documento(s) normativo(s): EN 792, EN 292 Partes 1&2, ISO 8662, Pneurop PN8NTC1...
  • Página 23 NOTES...
  • Página 24 WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. WARNUNG Der durch Elektrosanden, -sägen, -schleifen und -bohren sowie durch andere Bauarbeiten anfallende Staub enthält Chemikalien, die nachweislich Krebs sowie Geburts- bzw. andere Fortpflanzungsschäden hervorrufen.

Este manual también es adecuado para:

Sps10p18

Tabla de contenido