HoMedics UHE-CM15 Manual De Instrucciones E Información De Garantía página 6

How to Fill
CAUTION: Before filling with water, turn power off and unplug.
1. To remove the mist spout, turn it to the right until the icons align
in the "unlock"
set it aside. (See Fig. 3)
2. NOTE: For first time use and with each new wick, you must
soak the wick before operating. Unlock the spring loaded wick
by turning the wick holder to the left. Remove the wick from the
wick holder and soak the wick in water for 20 minutes. Return the
wick to the wick holder and secure to the humidifier top cover by
turning to the right. (See Fig. 4)
CAUTION: DO NOT operate the humidifier without first soaking
the wick. The humidifier WILL NOT function without a wick or if
the wick is dry.
3. Fill the water tank with clean, cool (not cold) tap water to the
MAX FILL line. DO NOT OVERFILL. We recommend using
distilled water if you live in a hard water area. (See Fig. 5)
4. Place the mist spout back on the unit, making sure the icons
align in the "unlock"
mist spout to the left until the icons are aligned in the "lock"
position. (See Fig. 6A & 6B)
NOTE: Be sure to wipe away any excess water from the top of
the tank before replacing the mist spout.
5. Plug adaptor into standard wall outlet.
6. To turn on, press the POWER
will illuminate when the humidifier is ON.
position. Lift up to remove the mist spout and
position. Lock into place by turning the
Button. The POWER Button
5
Fig. 3
Unlock Lock
Fig. 4
Fig. 5
Fig. 6A
Fig. 6B