Drift; Folding And Unfolding The Implement - Maschio GASPARDO Empleo Y Mantenimiento

ENGLISH
USE AND MAINTENANCE

3.1.3 DRIFT

Fig. 9B
If, after adjusting the equipment as shown in section 3.1.1 point
3), you feel the presence of a slight side skid of the equipment,
it can be corrected as follows
If, looking at the equipment from the back it:
- side skids to the right, the first rank of disk sinks deeper into
the ground than the second rank, it is necessary to lengthen the
adjusting tie rod (4 Fig. 8A) of the third point, until the machine
works in axis with respect to the center of the tractor.
- side skids to the left, the second rank of discs sinks deeper into
the ground than the first rank, it is necessary to shorten the
adjusting tie rod (4 Fig. 8A) of the third point, until the machine
works in axis with respect to the center of the tractor.

3.2 FOLDING AND UNFOLDING THE IMPLEMENT

The implement must be folded in as follows:
- Lift the implement completely in the front and in the rear side;
- Fold the wings acting on the coupled double-acting spool valve;
- Lock tractor spool valves (wings and carriage) to prevent unin-
tentional movements.
The implement must be unfolded as follows:
- Lift the implement completely in the front and in the rear side;
- Unfold the wings acting on the coupled double-acting spool
valve;
DANGER
Do not, under any circumstances, stand near to the equipment
while the folding frame is opening and closing.
31
cod. F07011424