SystemAir IV Smart CA Instrucciones De Instalación Y Funcionamiento página 34

34 | Informe de puesta en marcha
Measured data at commissioning
Voltage [V]:
Current L1 [A]*:
Current L2 [A]:
Current L3 [A]:
*For single-phase fans, fill in line "Current L1 [A]"
If an airflow measurement is not possible, this value can be calculated using the following formula:
Duct cross-section [sq. ft]
Commissioning of the fan successful?
Date, installer's signature
Date, operator's signature
Conserve el informe de puesta en marcha completo en un lugar seguro. En el caso de un reclamo de garantía, Systemair
puede solicitar este informe.
Si tiene preguntas técnicas, comuníquese con la división de soporte técnico de Systemair.
X
Flow speed [ft/min]
Temp. of transported air [°F]:
Fan impeller speed [rpm]:
Air volume [CFM]:
Differential pressure [in. w.g.]
*Δ - Pressure between suction-side and discharge of the fan
=
Air volume [CFM]
Yes No
152020