Maintenance; All Models - Craftsman ZTS 7500 Manual Del Operador

Gire a cero los montable posteriores del motor con el arranque electrico
Ocultar thumbs Ver también para ZTS 7500:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

MAINTENANCE
SCHEDULE
The following schedules should be followed for normal care of your rider and mower.
RIDER MAINTENANCE,
All Models
Before
Spring
8
25
100
200
Yearly
Each Use
& Fall
Hours
Hours
Hours
Hours
Clean Debris from Rider and Engine Compartment *
Clean Debris from Engine Cooling Areas & Air Filter *
Check Tire Pressure
Lubricate Rider & Mower *
Clean Deck & Check/Replace Mower Blades
Clean Battery & Cables
Check Rider Safety System **
Check / Adjust PTO Clutch
ENGINE
MAINTENANCE,
8 Hours
25 Hours or 100 Hours
200 Hours
200
500
20HPKohler
orDaily
2Months
orAnnually
or 2Years
Hours
Hours
Check Engine Oil Level *
Replace Air Filter *
Change Oil & Filter *
Remove Shroud, Clean Cooling Fins *
Replace Fuel Filter t
Check & Re-Gap / Replace Spark Plug
Service Starter Drive, Check & Adjust Valve
Clearance t
ENGINE
MAINTENANCE,
8 Hours
25 Hours
50 Hours
100 Hours
100-400
24HP Briggs
& Stratton
or Daily
or Every
or Every
or Every
Hours
Season
Season
Season
Check Engine Oil Level *
Replace Air Filter *
Change Oil *
Change Oil & Filter *
Clean Cooling Fins *
Replace Spark Plugs
Replace Fuel Filter t
Clean Combustion Chamber
* More often in hot (over 85 ° F: 30 ° C) weather or dusty operating conditions.
** Check the function of the safety system after the unit has been stored for 30 days or longer.
t These services should be performed by Sears or other qualified service dealer.
17
Tabla de contenido
loading

Tabla de contenido