GRE SCR55 Manual De Instrucciones página 3

Jumping or Diving from ladder.
The roller will stop automatically after finishing rolling the cover, you don't need to wait and
press the "Pause" button.
2- HOW TO SET THE WORKING TIME.
1. Turning on the power.
2. Pressing and holding the "Setting" button for three seconds.
3. When the power indicator start blinking, then it enters the setting mode.
4. Pressing the "forward" or "reverse" button for time keeping until you finish rolling the pool cover .
5. Then press the "Setting" botton again.
• NOTE: If you want to set time again, repeat these steps. The Forward time and reverse time will be the same after
setting the time.
•
3- HOW TO ASSEMBLE THE ELECTRIC MACHINE ON YOUR MANUAL POOL COVER REEL
Assemble it on T shape frame pool cover reel.
Step 1: Take part A and inset it into the hole of Part B.
Take part E and secure the automatic machine
on frame (part B) with four M5 metal screws
(part F)
Step 3: Take part G and insert it into the
hole on the top of electric machine.
And then connect part H (solar panel) with
the other end of part G.
Step 2: Take Part C and connect it with part A , Secure
the assembly with the metal screw D (M6 screw).
Step 4: Connect the line of
part H with the line on electric
machine, and then fix the
waterproof cap tightly.
Step 5: Fix part C and the tube with
Part I