Water Supply Requirements; Drain Requirements - Midea MLH52S7AGS Manual De Usuario E Instrucciones De Instalación

GROUNDING REQUIREMENTS
Improper connection of the equipment grounding conductor can result
in a risk of electrical shock. Check with a licensed electrician if you are in
doubt as to whether the appliance is properly grounded.
1. The washer MUST be grounded. In the event of malfunction or
breakdown, grounding will reduce the risk of electrical shock by
providing a path of least resistance for electrical current.
2.
Since your washer is equipped with a power supply cord having an
equipment-grounding conductor and a grounding plug, the plug
MUST be plugged into an appropriate, copper-wired receptacle that
is properly installed and grounded in accordance with all local codes.
If in doubt, call a licensed electrician. DO NOT cut off or alter the
grounding prong on the power supply cord. In situations where a two-
slot receptacle is present, it is the owner's responsibility to have a
licensed electrician replace it with a properly grounded grounding-type
receptacle.

WATER SUPPLY REQUIREMENTS

Cold water faucet MUST be installed within 42" (107 cm) of your washer's
water inlet. The faucet MUST be
hose can be connected. Water pressure MUST be between 10 and 120 psi.
Your water department can advise you of your water pressure.

DRAIN REQUIREMENTS

1.
Drain capable of eliminating 64.3 L per minute.
2.
A standpipe diameter of 1
3.
The standpipe height above the floor should be:
Minimum height: 24" (61 cm)
Maximum height: 47.24" (120 cm)
3/4
" (1.9 cm) garden hose-type so inlet
1/4
" (3.18 cm) minimum.
BACK
''
47.24
(120 cm)
Max.
''
24
(61 cm)
Min.
7