Midea MLH52S7AGS Manual De Usuario E Instrucciones De Instalación página 17

Prewash is an extra wash
PRE WASH before the main wash.
Use it for heavily soiled
clothes or for clothes
with a care label that
recommends prewashing
before washing. Be sure to
add liquid or powder high-
efficiency detergent, or
the proper wash additive
to the prewash dispenser.
You can lock the controls
EXTRA
to prevent any selections
RINSE and
from being made. Or you
PRE WASH can lock or unlock the
controls after you have
started a cycle.
Children cannot
accidentally start the
washer by touching
buttons with this option
selected.
To save a favorite cycle,
MY CYCLE
set the desired setting
for wash cycle, soil level,
spin speed and wash temp
settings and hold down
the My Cycle button for
3 seconds, A beep will
sound to indicate the
cycle has been saved.
To use your custom cycle,
press the My Cycle button
before washing a load.
To change the saved cycle,
set the desired setting and
hold down the My Cycle
button for 3 seconds.
PreWash must be selected
prior to pressing Pause/
Add a Garment. The
PreWash feature will fill
the washer with cold
water (adding the prewash
detergent), tumble the
clothes, drain and spin.
Then the washer will run
the selected wash cycle.
To lock the washer, press
and hold the Extra Rinse
and Pre Wash buttons for
3 seconds.
To unlock the washer
controls, press and hold
Extra Rinse and Pre Wash
buttons for 3 seconds.
NOTE: The Power button
can still be used when the
machine is locked.
NOTE: When using My
Cycle, wash options cannot
be modified after the cycle
has been started.
NOTE: If you change wash
options with My Cycle
before starting the cycle,
the My Cycle light will
turn off and you will be
returned to the base cycle.
17