Operation; Maintenance And Servicing - Denios LM 3 Manual De Instrucciones

6. Operation

Please make sure that the container and its contents
1. Before using the heating jacket, check the distributor manifold and the power cable. Ensure that it
does not show signs of damage.
2. Wrap the jacket round the vessel to be heated.
3. Adjust the retaining strap to give a firm seat without overstretching the jacket. The jacket should lie
smoothly on the vessel.
4. Ensure that the vessel is always open to prevent pressure build-up during heating.
5. The heating jacket has its own adjustable thermostat. Set the control to the required value. The set
temperature does not show the inside temperature, but the wall temperature of the container!
6. Only connect to the power source when the jacket is seated properly, the vessel is open and
the temperature has been set!
7. Monitor the heating process!
8. CAUTION! The medium may give off hot fumes during heating!
9. CAUTION! The surfaces may become hot during heating!
10. When the heating capacity for the application has been reached and the vessel has been heated, the
heating operation should be terminated.
11. Always remove the mains plug from the power source first before removing the jacket.
Otherwise the jacket may be damaged!
12. Remove the heating jacket. CAUTION! Vessel and jacket are HOT! DANGER OF BURNING!
13. Allow the heating jacket to cool for some considerable time. Do not leave to cool rolled up or
overlapping!

7. Maintenance and servicing

Before cleaning, the heating jacket must be disconnected from the power supply. Wipe the mat and the
terminal box with a damp cloth. Do not use any solvents or abrasives and never immerse the heater in liquid.
According to the electronic and electrical appliance regulations, owners of disused appliances
are legally required to dispose of such items separately. Please help to protect the
environment by not disposing of disused appliances with household waste.
Heizmäntel LM1, LM2, LM3, LM3A, LM4
117721, 117722, 117723, 156179, 117724
are safe to heat to the set temperature
Seite 8 von 16 Seiten Ausgabe 08/2008