Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
1
2
3
4

Binding

1. Determining the spine width
Place the pages to be bound below the measuring device.
Press the slide
down and read off the recommended spine
E
width from the scale.
Let the slider move up again and take out the pages.
The spine width is indicated on the metal strip in the cover.
Number of pages
(80 g/m²)
15–35
36–70
71–105
106–140
141–175
176–210
211–245
246–280
2. Placing pages in the cover
Straighten the pages so that the edges are flush.
Insert the pages into the cover.
Make sure that the gaps between the pages and the upper and
lower edge of the binding cover are identical.
3. Placing the cover in the machine
Make sure that the binding lever
go.
Place the binding cover in the binding tray.
The document supports
contents sit securely.
4. Binding
Caution, danger of crushing fingers/hands! When binding,
hold the lever with both hands and keep other persons away from
the machine.
Press the binding lever
until the binding indicator
Remove the bound book.
A de-binder, 7389-00-00, is available as a separate item. You can use this
accessory to reopen a bound book up to three times in order to remove or
add pages.
Spine width
of binding cover
10.5 mm
17.5 mm
24.5 mm
is pushed up as far as it will
A
C
and the holder in the binding tray ensure that the
down with both hands once or twice
A
is completely green.
F
3.5 mm
7 mm
14 mm
21 mm
28 mm
7
Tabla de contenido

Solución de problemas

loading

Tabla de contenido