Solutions To Common Problems; Food Soils Left On Dishes; Dishes Not Dry; Dishware Chipped - Electrolux EIDW5705PS Guía De Uso Y Cuidado

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

IMPORTANT
Before calling for service, review this list. It may
save you both time and expense. This list
includes common experiences that are not the
result of defective workmanship or material in
your dishwasher.
FOOD SOILS LEFT ON
DISHES
• Check incoming water temperature. (See
Getting Started) It should be at least 120°F
(49°C). (See Factors Affecting Performance,)
• Choose another cycle for longer washing time.
• Check rack loading section for proper
loading—avoid nesting items.
• Home water pressure may be too low—should
be 20 to 90 pounds per square inch (psi).
• Check water hardness. For extremely hard
water, it may be necessary to install a water
softener. (See Detergent Usage Guide)
• Use fresh detergent.
• Make sure items are not blocking any of the
spray arms, preventing them from rotating.

Solutions to Common Problems

DISHES NOT DRY

DISHWARE CHIPPED

• Make sure the rinse aid dispenser is filled.
• Increase the amount of rinse aid (See Rinse
Aid).
• Check the incoming water temperature. Be
sure it is at least 120°F (49°C).
• Check for proper loading—avoid nesting items.
• Plastic items may need to be towel dried.
More water collects on plastic items when
cycle is complete because they do not get as
hot as glass or metal items.
• Cups with a concave bottom will collect water.
• Load with care and do not overload. (See
Preparing and Loading Dishes)
• Place delicate items in top rack.
• Place glasses securely against pins and not
over pins.
• Load items so they are secure and don't jar
loose when moving racks in and out. Move
racks in and out slowly.
• Make sure tall glasses and stemware will clear
top of tub when rack is pushed in.
• It is recommeded to wash fine antique china
and crystal by hand.
15
Tabla de contenido
loading

Tabla de contenido