Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TEC17- MCDR2-45HP Lista de repuestos y manual del usuario / Parts list and owners manual
V. 0 –2017
Pag. 15
If maintenance involves access to parts on the drill that can not be reached from the ground, use a ladder platform according
to the rules of risk prevention at work.
Disconnect the battery before each intervention.
Do not check the fuel level, battery charging, etc. while smoking or in proximity to fire.
If you need to use auxiliary electric power, ensure that these are grounded.
Ensure that slings or fixing tools are properly secured. Pay attention to people who may be in the vicinity of the load.
If compressed air is used for cleaning, use lenses. Limit the pressure to 2 bar maximum (Kg / cm2).
Do not make unauthorized repair on the drill.
In case of intervention outside the workshop, place the drill flat and lock it.
The maintenance area must be clean and dry.
Do not stack rags smeared with grease or oil, as they represent a fire hazard.
Place used rags in a closed metal container.
Before starting maintenance operations, place the equipment on the ground, thereby obtaining support safe conditions.
The drill works by a hydraulic high pressure system; oil leaks could cause injuries to the unprotected parts of the body.
The drill has liquid and pieces that can reach high temperatures during operation: utmost care when performing maintenance
operations.
Attention to the moving parts on the machine.
To control the hydraulic system, it is necessary to remove the pressure as the tank normally is pressurized.
Tabla de contenido
