Speed Dialing - Nexx X-com Guia Del Usuario

Note:
1. If you are using multipoint mobile phone connection and you
have an incoming call from the second phone during the call of
the first phone, then you may still receive the call from second
phone. In this case, the call from the first phone is on waiting
mode. If you end a call, then it will automatically guide you to
the first phone call.
2. If you are using multipoint connection of mobile phone and
GPS, you may not be able to listen to the GPS voice instruction
during the phone call.

12.2 Speed Dialing

You can quickly make a phone call by using the voice speed
dial menu.
1. To enter into the voice speed dial menu, press and hold the
(+) Button for 3 seconds and you will hear a mid-tone single
beep and a voice prompt saying "Speed dial".
2. Tap the (+) Button or the (-) Button to navigate between the
menus. You will hear voice prompts for each menu item.
3. Tap the Center Button to select a voice menu among the
followings:
(1) Last number redial
(2) Speed dial 1
(3) Speed dial 2
4. After selecting the last number redial menu, you will hear a
5. To call one of the speed dials, tap the (+) Button or the (-)
6. If you want to exit the speed dial immediately, tap the (+)
7. To cancel the voice dialing or redialing last number command,
Note:
Make sure that you should connect the mobile phone and the headset
in order to use the speed dial function.
(4) Speed dial 3
(5) Cancel
voice prompt saying "Last number redial". Then, to redial the
last phone call number, tap the Center Button.
Button to navigate between the menus until you hear a voice
prompt saying "Speed dial (#)". Then, tap the Center Button.
Button or the (-) Button until you hear a voice prompt saying
"Cancel", and tap the Center Button. If any button is not
pressed within 15 seconds, the X-COM will exit the voice
speed dial menu and goes back to stand-by mode.
tap the Center Button while it is in progress.
X-COM
25