Delete All Bluetooth Pairing Information; Exit Voice Configuration Menu; Reset To Factory Default Setting - Nexx X-com Guia Del Usuario

X-COM
own speaker. It helps you to naturally speak at the correct level
according to varying helmet noise conditions. If this feature is
enabled, you can hear what you are speaking during an intercom
conversation or a phone call.

6.11 Delete All Bluetooth Pairing Information

Voice Prompt
Factory Default
Enable / Disable
To delete all Bluetooth pairing information on the X-COM, tap the
(+) Button or the (-) Button until you hear the voice prompt, "Delete
all pairings". Tap the Center Button to confirm.

6.12 Reset to Factory Default Setting

Voice Prompt
Factory Default
Execute
To restore factory default settings on the X-COM, tap the (+) Button
or the (-) Button until you hear the voice prompt, "Factory reset".
Tap the Center Button to confirm. The X-COM powers off with a
voice prompt, "Headset reset, goodbye".
14
"Delete all pairings"
N/A
Tap the Center Button
"Factory reset"
N/A
Tap the Center Button

6.13 Exit Voice Configuration Menu

Voice Prompt
Factory Default
Execute
To exit voice configuration menu and get back to stand-by mode,
tap the (+) Button or the (-) Button until you hear the voice prompt,
"Exit configuration". Tap the Center Button to confirm.
"Exit configuration"
N/A
Tap the Center Button