Nexx X-com Guia Del Usuario página 15

Tap (+) Button or (-) Button
Phone Pairing
Multipoint Pairing
Phone Selective Pairing
Media Selective Pairing
Speed Dial
VOX Phone
VOX Intercom
VOX Sensitivity
- Set up 1 /2 / 3 / 4 / 5 or cancel
Voice prompt
Sidetone
Delete All Pairings
Factory Reset
Exit Configuration
Voice Configuration Menu & Button Operations
Tap Center Button
None
None
None
None
Execute
Enable / disable
Enable / disable
- Enter adjustment mode
- Save and exit
Enable / disable
Enable / disable
Execute
Execute
Execute
7. PAIRING THE X-COM WITH
BLUETOOTH DEVICES
Before using the X-COM Bluetooth headset with any Bluetooth
device for the first time, you need to do the pairing operation. It can
be paired with Bluetooth mobile phones, Bluetooth stereo devices
such as MP3, or motorcycle specific Bluetooth GPS, and with a
Bluetooth adapter or transmitter such as Sena SR10 or SM10. This
pairing operation is only required once for each Bluetooth device.
The headset will remain paired with the devices and automatically
connects to the paired devices again when they are within range.
You will hear a high tone single beep and a voice prompt when
the headset connects to a paired device automatically: "Phone
connected" for a mobile phone, or "Media connected" for a
Bluetooth stereo device.
X-COM
15