Bluetooth Stereo Device Pairing; Bluetooth Gps Navigation Pairing - Nexx X-com Guia Del Usuario

7.3 Bluetooth Stereo Device Pairing

If the Bluetooth stereo device is integrated with a mobile phone
such as a smartphone, you don't need to pair the X-COM with it
separately. When the X-COM is paired with the mobile phone, it is
also paired as a stereo music device.
If you have a stand alone Bluetooth stereo device, follow the
pairing procedure separately. The procedure is the same as the
procedure given in "7.1 Mobile Phone Pairing".
Note:
1. If a Bluetooth connection between the headset and a mobile phone is
disconnected, press the Center Button for 3 seconds until you hear a
high tone single beep to recover the Bluetooth connection immediately.
2. If a Bluetooth connection between the headset and a media player
is disconnected, press the Center Button for 1 second to recover the
Bluetooth connection and play.

7.4 Bluetooth GPS Navigation Pairing

You can listen to voice instruction from Bluetooth GPS navigation.
Some GPS systems use a mobile phone profile (HFP, Hands-Free
Profile) and others use a stereo music profile (A2DP, Advanced
Audio Distribution Profile). Most motorcycle specific GPS systems
use a mobile phone profile for turn-by-turn voice instruction. You
can simultaneously use a mobile phone and a GPS which uses a
mobile phone profile by one of the following procedures.
7.4.1 Multipoint GPS Pairing
If you use GPS only for turn-by-turn voice instructions, not
for Bluetooth stereo music streaming, multipoint pairing is
recommended for the GPS connection. Multipoint Bluetooth
pairing allows the X-COM to connect two HFP devices at the same
time: mobile phone and GPS navigation. Follow the steps below to
pair the GPS using multipoint pairing.
1. To enter the voice configuration menu, press and hold the
Center Button for 12 seconds until you hear the voice prompt,
"Configuration menu".
2. Tap the (+) Button and you will hear the voice prompt, "Phone
pairing".
3. Search for Bluetooth devices on the GPS navigation screen.
Select NEXX X-COM in the list of devices detected on the GPS.
4. Enter 0000 for the PIN.
X-COM
17