Automatic Connection; Making And Receiving Calls - Motorola T603 Guia Del Usuario

a Press Menu > Settings > Connection > Bluetooth Link
> Handsfree> Look for Devices. The phone lists the
Bluetooth devices it finds.
b Select Motorola T603 from the list of
devices.
c Select OK or Yes to pair your car kit with
your phone.
d Enter the passkey: 0000
e Select OK.
Note: These steps are for most Motorola
phones. For other devices, see your device's user
manual.
When pairing is successful, the indicator light
flashes in purple followed by steady blue.
If initial pairing is not successful, the car kit
attempts to connect to devices that have already
been paired. This is indicated by the indicator light
When the Bluetooth connection is established, the
indicator light stays lit. If you are in a call when the car
kit powers up, the call is automatically transferred to
the car kit once the Bluetooth link is completed.
If your device is powered off when you start your
vehicle, the Bluetooth connection may not be
automatically established when you turn on your
device.
To manually connect to a previously paired device:
1 Turn on the device.
2 Set your device to look for the car kit.
For most Motorola phones, press Menu > Settings
> Connection > Bluetooth Link > Handsfree, select Motorola
T603 from the list, and press OK.
Your device attempts to connect to the car kit.
If a Bluetooth connection is established, the
indicator light changes from flashing red/blue
to steady blue.
using your car kit
14
flashing red and blue. When this occurs, return to
step 2 to repeat the initial pairing process.
additional pairings
Ensure that any previously paired devices are turned
off, and perform steps in "initial pairing" on page 12 to
pair with the new device.

automatic connection

Once paired, each time you start your vehicle, your
Bluetooth-enabled device and car kit are automatically
connected (when your device is powered on and the
device's relevant settings have not changed). The car
kit first tries to connect to the last phone device used.
If it is unable to connect, the car kit then tries
connecting to the next device in its history list. If there
are two phone devices available, the car kit connects
to the one last used (and ignores the other phone).
using your car kit
making and receiving
calls
Your T603 car kit allows you to make and receive
phone calls from your Bluetooth-enabled phone.
Note: Before you can use your Bluetooth-enabled
phone, you must first create a paired link (see "linking
your car kit and Bluetooth-enabled device" on page 11
for details).
The following table provides details for making and
receiving calls from your connected phone using your
car kit:
Note: Some features are phone/network dependent.
Make a Call Phone: On-in idle
(Hand Dial)
T603: On
Enter phone number on phone, press
Send key on phone, phone dials call.
13