Installation & Connection; Qualified Personnel - Hitecsa RCAH RCF Serie Manual De Instalación, Operación Y Mantenimiento

5 – I
NSTALLATION
Definitions
CUSTOMER – The Customer is the person, activity or the company, that has bought or hired the unit, and intends to use the
machinery for its intended use.
USER / OPERATOR – The User or Operator is the actual person that has been authorised by the Customer to use the unit.
QUALIFIED PERSONNEL - Defined as the person who has followed a relevant specific course of study, and so is able to
understand the dangers derived from the use of the machinery, and in turn, due to this, are capable of solving major dilemmas.
Safety regulations
The Manufacturer declines any responsibility for failure to respect the Safety Regulations and the prevention as described
below.
Furthermore, the Manufacturer declines any responsibility for damage caused by the improper use of the unit and/or
modifications carried out without proper authorisation.
•
Qualified personnel must carry out the installation.
•
During the installation operation, use protective clothing, for example: glasses, gloves, etc. as indicated by 686/89/CEE and
successive regulations.
•
During the installation operate in absolute security, pollution free air and in an area free of obstructions.
•
Respect the regulations in force in the country in which the apparatus is being installed. Specifically relative to its use, and
to the disposal of packing and products used for the cleaning and maintenance of the unit. Respect the recommendations
given by the producers of such products.
•
Before placing in function the unit, check the perfect connection of the various components and the internal parts of the
system.
•
Avoid at all costs human contact with moving parts and contact with the parts themselves.
•
Do not start servicing or cleaning t he unit, before the unit has been disconnected from the main supply.
•
The maintenance and the substitution of damaged or consumed parts must be carried out only by specialised personnel,
following the indications found within this manual.
•
Spare parts must correspond to the requirements specified by Manufacturer.
•
In case of dismantling of the unit, respect the anti-pollution regulations in force.
N.B. The installer and the user of the equipment must take into account, and solve problems, connected with any other type of risk
that may occur to the unit. For example, risks derived from the entrance of foreign bodies, or risks due to the presence of flammable
or toxic gas.
Preliminary operations
•
Check the perfect condition of the various components of the unit.
•
Control that contained within the packing, there are the installation accessories, and documentation.
•
Transport the packed section as close as is possible to the intended place of installation.
•
Do not place tools or weight on top of the packed unit.
Choosing place of installation
•
Use an anti-vibrating solid structure, capable supporting the weight of the unit and not hindering the normal opening of
service doors
•
Ensure the needed space for any connection and, in particular, for water condensation drainage system
•
Do not position the unit in an area in which flammable gases, acidic or corrosive substances are present. They may damage
various components in an irreparable manner
•
Allow a minimum amount of free space as shown on figure 5. This permits ease of installation and maintenance.
& C
ONNECTION
IOM_RCAH RCF_10a40_207695_190500_ES-IT-EN-FR-DE
5