Dimensions And Weights; Packing Dimensions - Hitecsa RCAH RCF Serie Manual De Instalación, Operación Y Mantenimiento

1 - I
NTRODUCTION
The heat pump air-to-air heat recovery units have been designed for residential and commercial applications and their purpose is to
meet both the air renewal needing and the treatment of the heat load related to it, while working at very high efficiency.
In fact, where the room air renewal or forced ventilation is needed, the unit transfers heat between the outside air and the room air
(otherwise lost at extraction), in two sequential steps, the first one as static (by plate heat exchanger) and the second one as dynamic
(by compressor and evaporator/condenser system).
In their basic working principle, they consist of (see figure 1):
1 – fans (1a supply & 1b exhaust)
2 – plate heat exchanger
3 – compressor equipment
4 – air filters (4a on outside air intake & 4b on return air intake)
5 – electrical board & electronics
These units may be integrated in traditional heating and cooling systems, but they can operate also autonomously if equipped with the
proper accessories.
This instruction manual supplies the necessary information for the transportation, the installation, operation and maintenance of the
unit, under safety working conditions. It is in addition to other technical documentation such as internal wiring connection diagram
and control manual.
Lack of observation of the details found within this manual, and an inadequate installation of the unit may cause the withdrawal of
the warranty supplied with the equipment.
Furthermore, the Supplier will not respond to any eventual damage, whether direct or indirect, caused by the incorrect installation, or
for damages caused by the installation being effectuated by inexperienced or unauthorized personnel.
Verify, upon acquisition, that the apparatus is complete and supplied as described.
Any eventual disputes must be presented in writing within 8 days from the reception of the goods.
Each unit is provided with identification plate listing the following:
- Address of the Maker
"CE" mark
-
- Model
- Serial number
- Unit code
- Max current in "A"
Main power supply (voltage "V", frequency "Hz", phases "Ph")
-
- Production date
Compressor rated input in "W"
-
- Refrigerant type
- Refrigerant filling in "Kg"
- PED category according to 97/23/CE
2 – D
IMENSIONS AND

Packing dimensions

The following table, referred to figure 2, shows the characteristic dimensions of the series.
10
1450
A (mm)
B (mm) 1230
470
C (mm)
L (mm) 235
265
H (mm)
331
L1 (mm)
323
H1 (mm)
212
Weight(kg)
W
EIGHTS
15 20
1450 1700
1230 1560
470 530
235 303
265 266
331 502
323 387
225 258
IOM_RCAH RCF_10a40_207695_190500_ES-IT-EN-FR-DE
25 30
8
1700 1900
1560 1700
530 705
303 335
266 290
502 545
387 545
258 305
40
1900
1700
705
335
290
545
545
315
3