Eaton PORTFOLIO LSR2B Instrucciones De Instalación

Eaton PORTFOLIO LSR2B Instrucciones De Instalación

Luminarias led de uso comercial en áreas ocultas
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

IB520031EN
697916
Installation Instructions – LSR2B / LSSQ2B Commercial LED
Rough-In
Instructions d'installation – DEL commerciale LSR2B / LSSQ2B
brute
Instrucciones de instalación de las luminarias LED de uso comercial
LSR2B y LSSQ2B en áreas ocultas
IMPORTANT: Read carefully before installing fixture.
Retain for future reference.
WARNING
Risk of Electrical Shock! Disconnect power at fuse or
circuit breaker before installing or servicing.
WARNING
Risk of Fire! Do not install insulation within 3 inches
(76 mm) of any part of the luminaire fixture or in a
way that may entrap heat.
WARNING
Installation and servicing to be performed only
by qualified personnel, If not qualified, consult an
electrician.
WARNING
Do not energize the LED Engine until the protective
covering has been removed and the lower trim
properly installed.
This fixture should be supported by main runners or
N
otee:
other structure that is capable of supporting fixture
weight of 7 Ibs.
SAFETY: When using electrical equipment, basic safety
precautions should always be followed, including the
following:
1.
This unit is for surface or pendant mounting only. Do
not use in hazardous locations nor near gas or electric
heaters.
2.
Do not use this equipment for other than the intended
use.
3.
Install only in accordance with National Electrical Code
and local regulatory agencies' requirements.
Aperture
Height
LSR2B
2.75"
10-1/8"
LSSQ2B
2.75"
10-3/16"
Brand Logo
reversed out of
black
T M
INS #
INS #
INS #
Tabla de contenido
loading

Resumen de contenidos para Eaton PORTFOLIO LSR2B

  • Página 9 Si no está cualificado, Instale únicamente de conformidad con el Código consulte con un electricista. Eléctrico Nacional y los requerimientos de las agencias regulatorias locales. Abertura Altura LSR2B 2.75” 10-1/8” LSSQ2B 2.75” 10-3/16” EATON IB520031EN Installation Instructions...
  • Página 10: Instalación

    Cilindro se ha girado en Ajuste los ganchos posición cerrada a través de esta apertura Sujete la correa a la placa de montaje o a la caja de derivación Gire hasta que quede cerrado Figura 4. EATON IB520031EN Installation Instructions...
  • Página 11: Limpieza

    (Figura 4). Conecte el blanco con el blanco, el negro con el negro y el verde (del suministro eléctrico) del lado de la alimentación con el cable pelado de cobre en la unidad del alojamiento cilíndrico. EATON IB520031EN Installation Instructions...
  • Página 12: Diagramas De Cableado

    0-10 VCC estándar. Las luminarias Portfolio de las Series LSR2B*D010TR/LSSQ2B*D010TR se puede regular con varios controles reguladores de 0-10 V CC. Para asegurarse de que cuenta con información actualizada sobre la compatibilidad entre luminarias y reguladores, remítase al sitio web de las luminarias LED Portfolio: www.portfolio-lighting.com. EATON IB520031EN Installation Instructions...
  • Página 13: Garantie Et Limitation De Responsabilité

    Warranties and Limitation of Liability Please refer to www.eaton.com/WarrantyTerms for our terms and conditions. Garantie et limitation de responsabilité Veuillez consulter le site www.eaton.com/WarrantyTerms pour obtenir les conditions générales. Garantías y Limitación de Responsabilidad Visite www.eaton.com/WarrantyTerms para conocer nuestros términos y condiciones.

Este manual también es adecuado para:

Portfolio lssq2b

Tabla de contenido