Dog trace X30 Manual De Instrucciones página 19

Location (
vegetation. This signal is audible up a distance of 30 m (X30/X30T transmitters) or up
to a distance of 300 m (X30B/X30TB transmitters).
Training acoustic signal is activated by the
pressing + push buttons simultaneously.
Volume of both types of acoustic signal may be adjusted in the receiver's MENU of
the X30B and X30TB transmitters.
1. Long press the MENU push button.
2. Select the
push button to confirm.
3. Select the transmitter (collar) position you wish to set –
the MENU push button.
4. Select
by using
5. By using
/ arrows select
of the training acoustic signal or
of the location acoustic signal. Press and hold the MENU push button to confirm.
6. Select the volume level – .
7. By repeatedly pressing
NOTE: Volume of the training and location acoustic signal may be set using the
Dogtrace GPS app.
Stimulation impulse (IMPULSE):
This feature enables to activate warning in the transmitter (collar) in the form of safe
stimulation impulses transmitted by the two contact points. Stimulation impulses do
not hurt the dog. Impulse is very unpleasant to the dog, and consequently, will soon
make connection between the oral command, acoustic signal and uncomfortable
feeling on the neck.
Setting the impulse strength is carried out in MENU in the same manner as the
selection of the acoustic signal volume strength.
Select
where 0 means no impulse, 1 is the lowest impulse strength and 15 is the highest.
This command is sent to the transmitter (collar), which is selected on the receiver
(handset) navigation main panel by simultaneously pressing the
buttons.
TIP: If the stimulation impulse is send to a dog using mobile phone application,
the strength of the stimulation impulse for this dog is automatically adjusted to
the set value in the receiver and vice versa.
Light feature (flash):
The light feature may be used to locate the dog in the dark. The function is activated
in MENU. The start-up procedure is the same as for the selection of the acoustic
signal volume strength, with the difference that in Point 4,
and in Point 5,
Dogtrace GPS application.
) acoustic signal is used to locate a dog in the dark or in dense
item by using
arrows, long press the MENU push button.
/
return to the main screen.
(ONLY GPS X30T/X30TB)
as per Point 4 and select the impulse strength as per Point 5,
(ONLY GPS X30T/X30TB)
is selected. A simpler option is to activate the feature in the
push button and location sound by
arrows; long press the MENU
/
to
to set the volume
to set the volume
; long press
+ FENCE push
is selected
19