Training - Dog trace X30 Manual De Instrucciones

Receiver display is divided into three parts:
Receiver information panel – top line displays the receiver's data – battery
charge status, GPS position accuracy, magnetic north direction (compass),
switching on the BEEPER (indicating dog standing still) and FENCE (circular fence)
features relating to one of the paired dogs.
Main navigation panel – middle display section provides information about the
currently selected transmitter (other receiver). Illuminated pointer arrow shows
the direction to the tracked dog location. In the middle of the display, distance
between the dog and the handler is shown. Different dogs are displayed by using
the / push buttons.
Transmitter information panel – bottom line shows data relating to the next
paired transmitter in sequence – battery charge status, RF signal strength, GPS
position accuracy.
NOTE: If the dog's direction and distance indicator flashes, the receiver has not
received the GPS data for a long time or the receiver/transmitter has no GPS
signal. In such case, the direction and distance to the last known position is
indicated on the display.
WARNING: If the direction indicator does not point correctly towards your dog,
recalibrate the digital compass.
Status indicated on the receiver's display:
– Receiver has not received information from the transmitter relating to
the dog's position for a long time.
– If the RF signal strength indicator flashes, it signifies that it has received
location data from the selected collar.
– If only the RF aerial flashes – it does not receive any RF signal from the transmitter.
– Receiver or transmitter does not have the GPS position.
– No paired transmitter at the given position.
– Receiver and transmitter are closer to each other than the accuracy of the
GPS position.

8.2 Training

This feature enables correction of undesirable behaviour up to the distance of
20 km. The basic DOG GPS X30/X30B kit enables using the acoustic command.
DOG GPS X30T/X30TB (training) kit is enhanced by the use of the correction
stimulation impulse. Another feature of the training kit is the light indication of the
dog in the dark with the aid of powerful LEDs.
Acoustic signal (tone):
All kits in the X30 series enable two types of acoustic signal.
The training acoustic signal (
may precede the stimulation impulse and it is a very effective deterrent. Replaces
whistle, whose volume the dog perceives in the same manner, even though it is far
away.
18
) is used as the sound command, which