Declarations On Noises; Declaration On Mechanical Vibrations - Sima EUROTRON PLUS Manual De Instrucciones Original

17. DECLARATIONS ON NOISES

The values given are emission values only and not necessarily emission levels that can work safely. Although
there is a correlation between emission levels and exposure, they cannot reliably be used to determine if preventive
measures are necessary supplements. The parameters that influence the actual level of exposure include the duration
of exposure, characteristics of the workshop, other sources of noise, etc... I.e. the number of machines and other
equipment
adjacent.
Moreover,
However, this information allows the user of the machine to better risk assessment.
WARNING: Working long exposures with circular saw is recommended individual hearing protection
supplies, along with others already described in this Operating Instructions.
DECLARATION OF THE NOISE EMISSION LEVELS OF CIRCULAR SAW MODEL
The statement is made with two values of noise emission level measured and consistent statement, as
provided in the Rules UNE-EN ISO 4871:1997 y UNE-EN 1870-1:2000.
Continuous sound pressure level equivalent, A weighted in the workplace in db (Lp
Declaration constant db (Kp
Sound power level emitted by the machine, A weighted, en db (Lw
Declaration constant db (Kw
Values determined according to ISO 7960:1995, Anexo A y UNE-EN 1870-1: 2000, utilizando las Normas UNE-EN
ISO 11202:1995 y UNE-EN ISO 3746:1995.

18. DECLARATION ON MECHANICAL VIBRATIONS

Circular Sawing Machines table EUROTRON models M-315 PLUS-315 PLUS T EUROTRON have no mechanical vibration
sources that involve risks to health and safety of workers.
permissible
exposure
)
A
)
A
levels
may
vary
from
)
A
)
A
15
ENGLISH
one
country
to
another.
UNLOADED LOADED
83 93
4 4
92 106
4 4