Crypto URC-605 Manual De Instrucciones página 16

2.1.3 Automatic code search programming
1. Turn on your device you want to program to
work with the Crypto URC-605/610 remote
control. Hold the remote in a straight line in front
of your TV at a distance less than 1 meter.
2. Press the remote device mode button and
the power buttom at the same time until the LED
light indicator lights up constantly.
3. Press and release the POWER button
4. The device button LED will blink continuously
in meaning that the remote is searching for the
code of your TV.
5. When the remote finds your TV code the TV
will turn off.
Attention: When the TV turns off you must
immediately press the OK button to avoid the
remote to go to the next code.
6. By pressing the OK button you have already
stored the code. The device button light will turn
off.
Note: This automatic search can be finished
without finding an appropriate code for your
TV.In that case the device button will stop
blinking and your TV will remain on.
Given the size of the code libraries in the remote
control, it will take several minutes to cycle
through all the codes