Crypto URC-605 Manual De Instrucciones página 14

2. PROGRAMMING TO CONTROL TV, DVB-T & OTHER DEVICES
2.1 Programming Control for TV Devices
You can program the URC-605/610 remote, to control your devices using the following
ways:
2.1.1 Code Input programming
1. Turn on your TV you want to program to work
with the Crypto URC-605/610 remote control.
Hold the remote in a straight line in front of your
TV at a distance less than 1 meter.
2. Press and hold on the remote the TV button
and the power button at the same time until the
light indicator lights up constantly.
3. Enter the four digit code that you found in the
code list
4. The TV button will blink two times and turn off.
If the TV button remains on please follow the
above steps 2-4 once more.
Attention: When a manufacturer has more than
one code you must note the codes and try them
one by one. Find which of the codes controls
your TV and uses the most functions and use
that one.
Note: If no key is pressed within 30 seconds
from the moment the light of the button turns on,
or another key other than number has been
pressed, the button will turn off and the
programming process will be canceled.