Crypto URC-605 Manual De Instrucciones página 15

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
2.1.2 Manual code search programming
1. Turn on your device you want to program to
work with the Crypto URC-605/610 remote
control. Hold the remote in a straight line in front
of your TV at a distance less than 1 meter.
2. Press the remote device mode button and
the power buttom at the same time until the LED
light indicator lights up constantly.
3. Press the CH
button one step at a time until your TV turns off.
Every time you press these buttons the device
button will blink once
4. When the TV turns off it means that the
remote have found the correct code for your TV.
5. Press the OK button to store the code. The
device button light will turn off.
Note:
• At step 3 you can hold down the CH button
constantly until the TV turns off. Attention: When
the TV turns off you must release the button
immediately so that the remote wont go to the
next code.
• This feature search the code libraries in the
remote control.Given the size of the code
libraries in the remote control, it will take several
minutes to cycle through all the codes
button or the
Tabla de contenido
loading

Este manual también es adecuado para:

Urc-610

Tabla de contenido